EWS TT1054-V2 Twin-Tank Salt Softener System
EWS TT1054 Twin-Tank Salt Softener System
The EWS TT1054 is a powerful, efficient twin-tank water softener built for homes with rough water. With digital metering, smart regeneration, and robust construction, it delivers consistent softened water while minimizing waste. Note: This system is a softener, not a filtration unit — it does not remove chlorine or chemical contaminants. Pair it with a CWL or EWS filtration system for complete water treatment.
Why Choose the TT1054?
- Twin-Tank Design — continuous soft water supply even during backwash cycles.
- Digital High-Efficiency Metered Valve — adapts regeneration cycles based on actual water usage to reduce salt and water waste.
- High Flow Capacity — supports up to ~28 GPM (≈12 GPM typical line flow) for demanding household use.
- Large Brine Capacity — 300 lbs salt storage (sodium or potassium chloride) means fewer fill-ups.
- Robust Construction — BPA-free resin tank, smart meter, and built with food-grade materials for long lifespan.
Specifications
| Model # | TT1054 |
| Dry Weight | 105 lbs |
| Full Weight (with water) | ≈320 lbs |
| Flow Rate | ~28 GPM |
| Brine Tank Capacity | 300 lbs salt (approx.) |
| Inlet/Outlet Sizes | ¾″ to 1½″ |
| Media / Resin | 45 lbs ion-exchange resin (est.) |
| Brine Tank Dimensions | 35″ H × 19″ (approx) |
Important Notes & Limitations
- Softening only — removes hardness (calcium & magnesium) via salt-based ion exchange. Does not remove chlorine, chloramine, VOCs, PFAS, or other chemical contaminants.
- Legal or local restrictions on brine discharge may apply — check your water district regulations before installation.
- Softened water can be corrosive to certain pipes or appliances. Use bypass loops for appliances, plants, or drinking taps.
- Install in cold-water main line; not intended for microbiologically unsafe water unless paired with disinfection.
- Periodic maintenance recommended — check salt levels, inspect resin, and service valve annually or per manufacturer guidelines.
What’s Included
- TT1054 softener unit (twin-tank resin setup)
- Brine tank (300 lb salt capacity)
- Digital metered control valve and bypass
- Internal resin bed and standard fittings
- Installation guide and operation manual
Ideal Use Cases
- Homes with ¾″ to 1½″ service lines and moderately high water hardness levels.
- Properties wanting softened water for showers, washing, and appliance longevity.
- Situations where a separate filtration system (like CWL/EWS) is or will be installed upstream for chemical and chlorine removal.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
EWS TT1054-V2 Twin-Tank Salt Softener System
EWS TT1054-V2 Twin-Tank Salt Softener System
EWS TT1054 Twin-Tank Salt Softener System
The EWS TT1054 is a powerful, efficient twin-tank water softener built for homes with rough water. With digital metering, smart regeneration, and robust construction, it delivers consistent softened water while minimizing waste. Note: This system is a softener, not a filtration unit — it does not remove chlorine or chemical contaminants. Pair it with a CWL or EWS filtration system for complete water treatment.
Why Choose the TT1054?
- Twin-Tank Design — continuous soft water supply even during backwash cycles.
- Digital High-Efficiency Metered Valve — adapts regeneration cycles based on actual water usage to reduce salt and water waste.
- High Flow Capacity — supports up to ~28 GPM (≈12 GPM typical line flow) for demanding household use.
- Large Brine Capacity — 300 lbs salt storage (sodium or potassium chloride) means fewer fill-ups.
- Robust Construction — BPA-free resin tank, smart meter, and built with food-grade materials for long lifespan.
Specifications
| Model # | TT1054 |
| Dry Weight | 105 lbs |
| Full Weight (with water) | ≈320 lbs |
| Flow Rate | ~28 GPM |
| Brine Tank Capacity | 300 lbs salt (approx.) |
| Inlet/Outlet Sizes | ¾″ to 1½″ |
| Media / Resin | 45 lbs ion-exchange resin (est.) |
| Brine Tank Dimensions | 35″ H × 19″ (approx) |
Important Notes & Limitations
- Softening only — removes hardness (calcium & magnesium) via salt-based ion exchange. Does not remove chlorine, chloramine, VOCs, PFAS, or other chemical contaminants.
- Legal or local restrictions on brine discharge may apply — check your water district regulations before installation.
- Softened water can be corrosive to certain pipes or appliances. Use bypass loops for appliances, plants, or drinking taps.
- Install in cold-water main line; not intended for microbiologically unsafe water unless paired with disinfection.
- Periodic maintenance recommended — check salt levels, inspect resin, and service valve annually or per manufacturer guidelines.
What’s Included
- TT1054 softener unit (twin-tank resin setup)
- Brine tank (300 lb salt capacity)
- Digital metered control valve and bypass
- Internal resin bed and standard fittings
- Installation guide and operation manual
Ideal Use Cases
- Homes with ¾″ to 1½″ service lines and moderately high water hardness levels.
- Properties wanting softened water for showers, washing, and appliance longevity.
- Situations where a separate filtration system (like CWL/EWS) is or will be installed upstream for chemical and chlorine removal.
$2,835.00
EWS TT1054-V2 Twin-Tank Salt Softener System—
$2,835.00
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
EWS TT1054 Twin-Tank Salt Softener System
The EWS TT1054 is a powerful, efficient twin-tank water softener built for homes with rough water. With digital metering, smart regeneration, and robust construction, it delivers consistent softened water while minimizing waste. Note: This system is a softener, not a filtration unit — it does not remove chlorine or chemical contaminants. Pair it with a CWL or EWS filtration system for complete water treatment.
Why Choose the TT1054?
- Twin-Tank Design — continuous soft water supply even during backwash cycles.
- Digital High-Efficiency Metered Valve — adapts regeneration cycles based on actual water usage to reduce salt and water waste.
- High Flow Capacity — supports up to ~28 GPM (≈12 GPM typical line flow) for demanding household use.
- Large Brine Capacity — 300 lbs salt storage (sodium or potassium chloride) means fewer fill-ups.
- Robust Construction — BPA-free resin tank, smart meter, and built with food-grade materials for long lifespan.
Specifications
| Model # | TT1054 |
| Dry Weight | 105 lbs |
| Full Weight (with water) | ≈320 lbs |
| Flow Rate | ~28 GPM |
| Brine Tank Capacity | 300 lbs salt (approx.) |
| Inlet/Outlet Sizes | ¾″ to 1½″ |
| Media / Resin | 45 lbs ion-exchange resin (est.) |
| Brine Tank Dimensions | 35″ H × 19″ (approx) |
Important Notes & Limitations
- Softening only — removes hardness (calcium & magnesium) via salt-based ion exchange. Does not remove chlorine, chloramine, VOCs, PFAS, or other chemical contaminants.
- Legal or local restrictions on brine discharge may apply — check your water district regulations before installation.
- Softened water can be corrosive to certain pipes or appliances. Use bypass loops for appliances, plants, or drinking taps.
- Install in cold-water main line; not intended for microbiologically unsafe water unless paired with disinfection.
- Periodic maintenance recommended — check salt levels, inspect resin, and service valve annually or per manufacturer guidelines.
What’s Included
- TT1054 softener unit (twin-tank resin setup)
- Brine tank (300 lb salt capacity)
- Digital metered control valve and bypass
- Internal resin bed and standard fittings
- Installation guide and operation manual
Ideal Use Cases
- Homes with ¾″ to 1½″ service lines and moderately high water hardness levels.
- Properties wanting softened water for showers, washing, and appliance longevity.
- Situations where a separate filtration system (like CWL/EWS) is or will be installed upstream for chemical and chlorine removal.
